Produktbilder und Zubehör werden von einem Content Provider zur Verfügung gestellt. Die Bilder können vom Original geringfügig abweichen und dienen der Veranschaulichung. Kompatibilitätsgarantie für Zubehör kann nicht gewährleistet werden. Der Lieferumfang entspricht der Artikelbeschreibung (ggf. baugleicher Artikel) Bitte beachten Sie die Produkt- und die Zustandsbeschreibung.
| Anschlusstechnik: | Kabellos |
|---|---|
| Antenne: | Intern |
| Ausführung: | original |
| Authentifizierungsmethode: | Radio Service Set ID (SSID), MS-CHAP v.2, Extensible Authentication Protocol (EAP), EAP-FAST, EAP-SIM, EAP-AKA, EAP-GTC, EAP-TLS, EAP-TTLS |
| Breite: | 16.5 cm |
| Data Link Protocol: | Bluetooth, IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11n, ZigBee, IEEE 802.11ac Wave 2, IEEE 802.11ax (Wi-Fi 6) |
| Formfaktor: | Extern |
| Frequenzband: | 2.4 GHz, 5 GHz |
| Gerätetyp: | Accesspoint |
| Gewicht: | 680 g |
| Hersteller: | Fortinet |
| Höhe: | 5.2 cm |
| Internet der Dinge (IoT) kompatibel: | Ja |
| Kapazität: | Maximale Anzahl konfigurierter SSIDs: 24 ¦ Drahtlose Klienten pro W-Lan-Radio: bis zu 512 |
| Kennzeichnung: | RoHS |
| Kommunikationstechnologie: | Bluetooth Low Energy (LE), Zigbee |
| Leistung: | Maximale Datenrate (2,4 GHz): 400 Mbit/s ¦ Maximale Datenrate (5 GHz): 2400 Mbit/s |
| Leistungsaufnahme im Betrieb: | 18.5 Watt |
| Leistungsmerkmale: | DFS-Unterstützung, Wireless Intrusion Detection System (WIDS), Reset-Taste, Maximum Ratio Combining (MRC), Low Density Parity Check (LDPC), Wireless Intrusion Prevention System (WIPS), 802.1x-Authentifizierung, iBeacon-Technologie, Paketaggregation A-MPDU |
| Leitungskodierformat: | 64 QAM, 256 QAM, BPSK, QPSK, 1024 QAM, OFDMA |
| Max. Betriebstemperatur: | 50 °C |
| Min Betriebstemperatur: | 0 °C |
| Power Over Ethernet (PoE)-Unterstützung: | PoE+ |
| Produktzertifizierungen: | IEEE 802.1Q, IEEE 802.11b, IEEE 802.11a, IEEE 802.3af, IEEE 802.3ad (LACP), IEEE 802.11g, IEEE 802.1x, IEEE 802.11i, IEEE 802.11h, IEEE 802.11e, IEEE 802.11n, IEEE 802.11k, IEEE 802.3at, IEEE 802.11j, IEEE 802.3az, IEEE 802.11r, IEEE 802.11v, IEEE 802.11a |
| Robustes Design: | Innen |
| Routing Protocol: | MLD |
| Schnittstellen: | 2 x 1000Base-T - RJ-45 ¦ 1 x USB 2.0 - Type A ¦ 1 x management (RS-232) - RJ-45 |
| Spread-Spectrum-Methode: | OFDMA |
| Tiefe: | 16.5 cm |
| Transportgewicht: | 1.185 kg |
| Verschlüsselungsalgorithmus: | PEAP, WPA, WPA2, WEP, EAP-SIM, EAP-AKA, WPA3, EAP-FAST, EAP-TLS, EAP-TTLS, MSCHAPv2, EAP-GTC |
| Zubehör im Lieferumfang: | Montagekit für Wand/Decke/T-Schiene |
| Zulässige Luftfeuchtigkeit im Betrieb: | 5 - 90% (nicht kondensierend) |
| mtbf: | 10 Jahre |
| GPSR - Wirtschaftsakteur: | Fortinet, Deutschland, Weihenstephaner Str. 12, München, 81673, cs@fortinet.com |
|---|---|
| GPSR - Produkthersteller (Kontaktdaten für GPSR): | Fortinet, Deutschland, Weihenstephaner Str. 12, München, 81673, cs@fortinet.com |
| GPSR - EU Verantwortliche Person: | Fortinet, Deutschland, Weihenstephaner Str. 12, München, 81673, cs@fortinet.com |
| EU Data-Act-Url: | https://www.fortinet.com/de/corporate/about-us/gdpr |
| Sicherheitshinweis: | Sicherheitshinweise Accesspoints Deutsch.pdf |
| Warnhinweis: | Warnhinweise Accesspoints Deutsch.pdf |
| Anschlusstechnik: | Kabellos |
|---|---|
| Antenne: | Intern |
| Ausführung: | original |
| Authentifizierungsmethode: | Radio Service Set ID (SSID), MS-CHAP v.2, Extensible Authentication Protocol (EAP), EAP-FAST, EAP-SIM, EAP-AKA, EAP-GTC, EAP-TLS, EAP-TTLS |
| Breite: | 16.5 cm |
| Data Link Protocol: | Bluetooth, IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11n, ZigBee, IEEE 802.11ac Wave 2, IEEE 802.11ax (Wi-Fi 6) |
| Formfaktor: | Extern |
| Frequenzband: | 2.4 GHz, 5 GHz |
| Gerätetyp: | Accesspoint |
| Gewicht: | 680 g |
| Hersteller: | Fortinet |
| Höhe: | 5.2 cm |
| Internet der Dinge (IoT) kompatibel: | Ja |
| Kapazität: | Maximale Anzahl konfigurierter SSIDs: 24 ¦ Drahtlose Klienten pro W-Lan-Radio: bis zu 512 |
| Kennzeichnung: | RoHS |
| Kommunikationstechnologie: | Bluetooth Low Energy (LE), Zigbee |
| Leistung: | Maximale Datenrate (2,4 GHz): 400 Mbit/s ¦ Maximale Datenrate (5 GHz): 2400 Mbit/s |
| Leistungsaufnahme im Betrieb: | 18.5 Watt |
| Leistungsmerkmale: | DFS-Unterstützung, Wireless Intrusion Detection System (WIDS), Reset-Taste, Maximum Ratio Combining (MRC), Low Density Parity Check (LDPC), Wireless Intrusion Prevention System (WIPS), 802.1x-Authentifizierung, iBeacon-Technologie, Paketaggregation A-MPDU |
| Leitungskodierformat: | 64 QAM, 256 QAM, BPSK, QPSK, 1024 QAM, OFDMA |
| Max. Betriebstemperatur: | 50 °C |
| Min Betriebstemperatur: | 0 °C |
| Power Over Ethernet (PoE)-Unterstützung: | PoE+ |
| Produktzertifizierungen: | IEEE 802.1Q, IEEE 802.11b, IEEE 802.11a, IEEE 802.3af, IEEE 802.3ad (LACP), IEEE 802.11g, IEEE 802.1x, IEEE 802.11i, IEEE 802.11h, IEEE 802.11e, IEEE 802.11n, IEEE 802.11k, IEEE 802.3at, IEEE 802.11j, IEEE 802.3az, IEEE 802.11r, IEEE 802.11v, IEEE 802.11a |
| Robustes Design: | Innen |
| Routing Protocol: | MLD |
| Schnittstellen: | 2 x 1000Base-T - RJ-45 ¦ 1 x USB 2.0 - Type A ¦ 1 x management (RS-232) - RJ-45 |
| Spread-Spectrum-Methode: | OFDMA |
| Tiefe: | 16.5 cm |
| Transportgewicht: | 1.185 kg |
| Verschlüsselungsalgorithmus: | PEAP, WPA, WPA2, WEP, EAP-SIM, EAP-AKA, WPA3, EAP-FAST, EAP-TLS, EAP-TTLS, MSCHAPv2, EAP-GTC |
| Zubehör im Lieferumfang: | Montagekit für Wand/Decke/T-Schiene |
| Zulässige Luftfeuchtigkeit im Betrieb: | 5 - 90% (nicht kondensierend) |
| mtbf: | 10 Jahre |
| GPSR - Wirtschaftsakteur: | Fortinet, Deutschland, Weihenstephaner Str. 12, München, 81673, cs@fortinet.com |
|---|---|
| GPSR - Produkthersteller (Kontaktdaten für GPSR): | Fortinet, Deutschland, Weihenstephaner Str. 12, München, 81673, cs@fortinet.com |
| GPSR - EU Verantwortliche Person: | Fortinet, Deutschland, Weihenstephaner Str. 12, München, 81673, cs@fortinet.com |
| EU Data-Act-Url: | https://www.fortinet.com/de/corporate/about-us/gdpr |
Alexander Brill ist Ihr Ansprechpartner für:
Fragen zum Artikel
Passendes Zubehör
Hohe Stückzahlen