WLAN antennas: Strong signal quality for your network
Whether you need stable WLAN in the office, a reliable connection for outdoor use, or targeted network expansion, WLAN antennas play a central role in radio coverage and performance. With the right antenna, you can optimize your WLAN infrastructure cost-effectively and in line with your requirements—for routers, access points, or end devices such as PCs.
Do you have questions about our products in this category?
Our team will advise you extensively on your questions:
+49 (0) 39203 96 96 100
5.150~5.850GHz(18dBi),Smart MIMO Directional Sector Antenna(18deg),N-Type Connector×3,Outdoor
Cisco Meraki - Antenna - dipole - Wi-Fi - 3 dBi (for 2.4 GHz), 5.7 dBi (for 5 GHz) - omni-directional - indoor (pack of 5) - for Cisco Meraki MR42E
AirLancer ON-QT90 Outdoor WLAN omnidirectional antenna with 90 degree beam angle, +6 dBi (2.4/5/6 GHz), 4x4 MIMO, incl. cable (4x N-type connectors), flexible mounting kit, ideal for use with OW-602, OX-6402
N-Male to N-Female Lightning Protector for direct mount onto WLA632. Requires one unit for each coaxial cable on the antenna.
AirLancer IN-Q180+ Indoor WLAN sector antenna for ceiling mounting, +3 dBi (2.4 GHz) or +5 dBi gain (5 GHz), 4x4 MIMO, incl. cable and mounting kit, ideal for LX-6402
Set of 3 (H x 1/ V x 2 Polarization) 5 GHz, Omni-directional, 5dBi, Direct-mount, N-type connectors. Pole mount, I-beam, and ceiling tile mount hardware included. Requires N-male to N-female extension cable
Facade antenna for 4700 AP Integrated snap-on dual-band omni-directional facade antenna for 4700 series Access Points.
AirLancer IN-Q180 Indoor WLAN sector antenna for ceiling mounting, +3 dBi (2.4 GHz) or +5 dBi gain (5 GHz), 2x2 + 2x2 MIMO, incl. cable and mounting kit
AirLancer O-360D-5G Omni-directional outdoor antenna (4G/5G) for connection to LANCOM 4G/5G routers, coverage of all 4G and 5G bands from 700-3,800 MHz, 2x2 MIMO, incl. 5m cable with SMA connector as well as mounting k
GNSS antenna for global GNSS timing reference featuring 26 dB low noise, high gain amplifier with a nominal impedance of 50 Ohms and uses a N-Type Female Connector and supports a Temp Range of -40C to +85C. Includes mounting collar.
Which WLAN antenna is right for your application?
The selection ranges from compact external WLAN antennas for PCs to powerful WLAN directional antennas for outdoor applications. Depending on the application and environment, different antenna types are recommended:
- WLAN antenna for routers: Ideal for selective signal amplification in the office or at home
- External WLAN antenna for PCs: Ensures better connection in areas with poor reception
- WLAN directional antenna: Beams the signal in a specific direction – for pinpoint connections
- WLAN antenna for outdoor use: Weather-resistant models with high gain for large areas
What is the difference between 2.4 GHz and 5 GHz WLAN antennas?
Many models support either the 2.4 GHz or 5 GHz frequency range – some support both. The differences:
2.4 GHz antennas
- Greater range, penetrates walls better
- Higher interference factor in dense network coverage
5 GHz Wi-Fi antennas
- Higher data rates at shorter distances
- Ideal for modern corporate networks with many end devices
Dual-band antennas (2.4 & 5 GHz) offer maximum flexibility – especially in mixed networks with different requirements.
What is a WLAN directional antenna – and when is it worthwhile?
A WLAN directional antenna focuses the signal in a specific direction. This allows you to:
- Significantly increase the range
- Improve signal quality over distance
- Connect specific buildings or networks (e.g., in a campus environment)
Special case: Outdoor directional WLAN antenna
Thanks to its weatherproof housing and high performance, it is ideal for long distances in the open air. Particularly effective: panel antennas and access point directional antennas.
Outdoor antenna for routers: Targeted expansion of WLAN and LTE
An outdoor antenna for routers improves network coverage in remote areas or in difficult structural conditions. External LTE antennas also help to significantly increase the reception level of LTE routers.
Typical areas of application:
- Outdoor areas, warehouses, or container offices
- Areas with poor reception and LTE/4G coverage
- Mesh network extension between buildings
Replacing an access point antenna – what to consider?
Many professional access points allow the connection of external antennas. The advantage: depending on the environment and requirements, you can choose the right antenna – e.g., an external access point antenna for selective amplification or a directional antenna for directional connections.
Important:
- Make sure you have the right antenna connection (e.g., RP-SMA, N-type)
- Ensure compatibility with the frequency band
- The correct installation location is crucial for signal quality
WLAN antennas: new, used, and refurbished at it-market
At it-market, you will find an extensive selection of Wi-Fi antennas – for routers, access points, or end devices. Whether you need an external Wi-Fi antenna, outdoor directional antenna, 5 GHz antenna, or panel antenna – we offer suitable solutions for office, industrial, warehouse, or outdoor use:
- 3-year warranty for companies
- Up to 2,500€ buyer protection
- Short delivery times
Do you have any questions? Our sales team will be happy to answer your questions about IT hardware and IT remarketing.