Transceivers: Modular connection solutions for your network
Transceivers are key components of modern network technology - they enable flexible data transmission via copper or fiber optics and can be integrated directly into switches, routers, or firewalls. With the right transceiver modules, you can expand your infrastructure with Gigabit or high-speed connections - exactly as needed.
Do you have questions about our products in this category?
Our team will advise you extensively on your questions:
+49 (0) 39203 96 96 100
LevelOne SFP-4310 1.25Gbps Single-mode BIDI Industrial SFP Transceiver, 10km, TX 1310nm / RX 1550nm, -40 degree C to 85 degree C, compatible
1-port 1000BASE-CWDM Small Form Factor Pluggable (SFP) Gigabit Ethernet Transceiver, connector type: LC - 1470nm Wavelength, 70km. Diagnostic Monitoring Interface., compatible
NVIDIA twin port transceiver, NDR 800Gb/s as 2x400Gb/s, OSFP, dual MPO12 APC, 850nm MMF, up to 50m, flat top, compatible
Aruba XFP - 850nm serial pluggable XFP optic (LC), target range 300m over MMF (used in M3 only)
LANCOM SFP-DAC40-1m 40 Gbps Direct Attach Cable (DAC) for direct connection of LANCOM switches by QSFP+ ports, length 1m
SFP28 25G Active Optical Cables, direct-attach fiber assemblies with SFP connectors 30-meter
1-port 10GBASE-BX20-U (Up-Stream) Bi-Directional (BiDi) Small Form-Factor Pluggable (SFP+) Optics Module, Single Mode Fiber (SMF), 20km, TX:1330 nm, RX: 1270 nm, LC Connector, Digital Diagnostic Monitor (DDM), Temperature -40/85C
What is a transceiver and how does it work?
A transceiver (transmitter + receiver) sends and receives data via network cables - in the form of light (fiber optic) or electrical signals (copper). It is plugged into standardized ports such as SFP, SFP+, or QSFP and is often hot-swappable, meaning it can be replaced during operation.
Typical applications:
- Connecting network components over long distances
- Upgrading existing networks to higher bandwidths
- Integration into modular switches, firewalls, or storage systems
Overview of common transceiver formats
SFP & SFP+:
- SFP module: The standard for 1 Gbit/s connections
- SFP+ module: Supports up to 10 Gbit/s – ideal for servers or core switches
- SFP S / SFP SFP+: Combinations or product names in manufacturer documentation, often used synonymously
Other formats:
- QSFP/QSFP28: For 40G, 100G, or 400G applications
- SFP28: 25G transceiver for modern data centers
Fiber optic transceivers vs. copper
Fiber optic transceivers enable interference-free transmission over long distances - ideal in data centers, between buildings, or in EMC-critical environments. In comparison, copper transceivers are suitable for short distances (up to 100 m) and standardized cabling.
Advantages of fiber optics:
- High bandwidths (10G, 25G, 100G+)
- Low latency
- Insensitive to electromagnetic interference
When selecting a fiber optic transceiver module, wavelength, distance, and fiber type (single-mode vs. multi-mode) should be taken into account.
Manufacturer compatibility: Cisco, Juniper, Aruba, Dell, Lenovo, and many more
Transceivers are often manufacturer-specific. it-market offers a wide selection of compatible modules for the following systems:
- Cisco transceivers: e.g., for Catalyst, Nexus, or Meraki series
- Juniper transceivers: for EX, QFX, and MX platforms
- Aruba transceivers: for Aruba switches or Instant-On solutions
- Dell & Lenovo transceivers: specially validated modules for PowerSwitch and ThinkSystem environments
- And many other manufacturers
Transceivers: new, used, and refurbished at it-market
At it-market, you will find tested network transceivers for all common manufacturers and requirements. Whether you need an SFP module, a 10G SFP+, a QSFP, or a fiber optic transceiver, we offer new, used, and refurbished transceivers with tested quality.
Benefit from:
- 3-year warranty for companies
- Up to €2,500 buyer protection
- Short delivery times
Do you have any questions? Our sales team is happy to answer your questions about IT hardware and IT remarketing.